Skip to content

Free U.S. Shipping · 60 Day Returns · No Restocking Fee

by AWA Team

Red Light Therapy Myths Debunked: Does It Work Through Clothes, Through Glass, and Can You Overdo It?

Next step: Check the real specs behind the myths. Compare AWA devices or Find my device.

Published May 28, 2026. Updated October 2026.

Quick answer

Anything between a device and your skin, such as fabric or glass, lowers the irradiance that arrives, and the energy formula scales with that fraction. We have not published a measurement for any fabric or glass, so this guide shows the arithmetic with invented percentages. For session limits and eye protection, follow your device manual. We make no claims about outcomes.

Why myths spread about light devices

Red light therapy gets discussed on social media in short clips, and short clips reward confident answers. Questions like "does it work through clothes," "does it work through glass," and "can you overdo it" get firm answers from people who may never have read a device manual. This guide takes a different approach. For each myth it separates what can be checked from what cannot, shows the arithmetic, and sends you to the manual. It makes no claims about outcomes, and it does not rank devices.

Myths and what you can check

Common claim online A plain fact you can check Where to check
Light passes through clothes without loss Fabric absorbs and scatters part of the light, and the amount depends on the material Your manual, and the irradiance arithmetic below
Light passes through glass without loss Glass reflects and absorbs part of the light, and the amount depends on the glass and the angle Your manual, and the irradiance arithmetic below
More minutes are always better Energy rises with time by simple arithmetic. How much time suits a device is set by its manual Session guidance on the product page and in the manual
A panel is the same as sunlight Sunlight is a broad mix of wavelengths. A device lists the specific wavelengths it emits The wavelength line on the spec sheet
LED count tells you how powerful a device is Irradiance at a stated distance is the number that connects to energy Irradiance and distance on the spec sheet
All red light devices have the same regulatory status Select devices carry FDA 510(k) clearance for specific, limited uses. Most light devices are sold as general wellness products Each product page and label
Eye protection is never needed The manual says what to use. Near infrared is mostly invisible, so brightness is a poor cue Your manual, and our eye protection guide
A bigger wattage figure means more light on your skin Total watts are not irradiance Irradiance in mW/cm² at a distance

Myth: light goes through clothes

The question is really one about how much light still reaches your skin after it passes through fabric. Fabric absorbs and scatters light, and the amount depends on the weave, thickness and color. We have not published a measurement for any fabric, so we will not give you a percentage. What we can show is how the formula handles the question.

The energy reaching the skin is the irradiance at the skin multiplied by time, and anything between the device and the skin lowers the irradiance at the skin. If a panel is stated at 83.5 mW/cm² at 6 inches and some fraction of that arrives, the formula scales with that fraction.

Invented fraction of light reaching skin FX300 at 6 inches (83.5 mW/cm²), arriving Energy for 10 min (J/cm²)
100% (nothing in the way) 83.5 50.1
75% 62.62 37.6
50% 41.75 25.1
25% 20.88 12.5

Arithmetic example with invented percentages. We have not published a measurement of how much light any fabric or glass passes, so the percentages are placeholders that show how the formula behaves.

Arithmetic example: at an invented 50% arrival, 83.5 x 0.5 = 41.75 mW/cm². For 10 minutes: 41.75 x 600 / 1000 = 25.05 J/cm², half of the 50.1 J/cm² with nothing in the way. The point is the proportion, not the 50%. The AWA LX300 face mask page describes use on clean bare skin, and the panel pages describe use at about 6 to 12 inches from the area. Use your manual for how to position your own device.

Myth: light goes through glass

Window glass sits between you and a device in some setups. Glass reflects part of the light and absorbs part of it, and the split depends on the glass, any coatings and the angle. The same proportional arithmetic applies: whatever fraction arrives sets the irradiance at the skin. A pane of glass also changes the working distance, because the panel and your skin are now separated by the pane and the gap on each side. The manual's working distance was written for a clear path. If you plan to use a device in a window setup, ask the AWA team first.

Woman wearing the AWA LX300 LED face mask

The mask we make

LX300 LED Face Mask · $239.99

Hands free and cordless, with red, near infrared and blue modes. Ten minutes, three to four times a week.

✓ Pay with your FSA or HSA card ✓ Free US shipping ✓ 60 day returns, opened or used

See the LX300

Myth: more is always better

The energy formula, J/cm² = mW/cm² x seconds / 1000, shows that energy rises in a straight line with time and sharply with proximity. It does not say anything about what an amount does to a person. The only limit written for your device is its manual. Our guide to using a device beyond its manual has a table of the common ways people go past it, and the session length guide shows where the time guidance lives. For a plain look at how often schedules are described, see our guide on how often to use red light therapy.

Myth: all devices are the same

Two devices can both say "660nm and 850nm" and still differ in irradiance at a stated distance, in LED count, in working distance and in the way the numbers were measured. Irradiance is the useful comparison, and it only means something with its distance. The AWA FX300 is stated at 83.5 mW/cm² at 6 inches and the FX500 at 94, per our irradiance specs guide. For wavelength differences, see the 660nm vs 850nm guide.

Myth: regulatory language means the same thing everywhere

Marketing pages use words like "cleared," "registered" and "compliant" loosely. In plain terms, select devices carry FDA 510(k) clearance for specific, limited uses, and a 510(k) is a premarket submission showing a device is substantially equivalent to a legally marketed device. Most light devices are sold as general wellness products, which FDA addresses in separate guidance. The status of a device depends on the device, so read each product page and label rather than assuming a whole product line shares one status.

How to check a claim yourself

  1. Find the wavelengths, irradiance and distance on the spec sheet.
  2. Find the session guidance in the manual and on the product page.
  3. Do the arithmetic. If a claim cannot be turned into numbers, consider it an opinion.
  4. Look for the status of the device on its label and product page.
  5. If a claim concerns your own situation, ask a doctor. Ask first if you have a medical condition, take medications, are pregnant, or have light sensitivity.

Common mistakes

  • Believing an online percentage for fabric or glass with no measurement behind it.
  • Assuming the manual's distance still applies when something is between the device and the skin.
  • Equating clock time with energy and ignoring distance.
  • Reading LED count or watts as a power rating.
  • Skipping eye protection because a video said it was optional. Follow your manual, and see our guide on whether to keep your eyes open or closed.
  • Using one clip as a substitute for the label and manual.

Before you use any light device: read the label, follow the device manual, and use eye protection as directed. Ask a doctor first if you have a medical condition, take medications, are pregnant, or have light sensitivity.

Not sure which device fits?

Pick what you want to work on. Every device ships free, takes FSA and HSA cards, and has 60 day returns.

Or take the 60 second device finder →

Related guides in this series

Device pages

Read the full page and label for each device before you use it: AWA FX300 panel, AWA LX300 face mask. You can also browse all AWA red light therapy devices.

Shop the devices mentioned here: the FX500 full body panel for larger areas and the LX300 face mask for hands free sessions. Not sure which fits? Compare AWA devices or take the 60 second device finder.

Frequently asked questions

Does red light therapy work through clothes?

Fabric absorbs and scatters part of the light, so less reaches the skin, and the amount depends on the material. We have not published a measurement, and the energy formula simply scales with whatever fraction arrives.

Does red light therapy work through glass?

Glass reflects and absorbs part of the light, and it also changes the working distance. We have not published a measurement for glass. Ask the AWA team before planning a window setup.

Can you overdo red light therapy?

You can use a device longer, closer or more often than its manual directs. By the arithmetic, energy rises with time and with proximity. Follow the manual for your device.

Is a bigger wattage the same as more irradiance?

No. Total watts do not say how much power lands on each square centimeter. Irradiance in mW/cm² at a stated distance is the number to compare.

Do all light devices have the same FDA status?

No. Select devices carry FDA 510(k) clearance for specific, limited uses, and most light devices are sold as general wellness products. Read each product page and label.

Sources

  • FDA: General Wellness policy guidance (CDRH). Final guidance dated January 2026 that sets out the agency's compliance policy for general wellness products. It is a policy document, not a statement about any one device.
  • FDA: Premarket Notification 510(k). Explains that a 510(k) is a premarket submission showing a device is substantially equivalent to a legally marketed device, and that a company must receive an FDA order clearing the device before marketing it in the U.S.
  • FDA: Laser Products and Instruments. Describes FDA laser hazard classes I to IV, notes that higher classes carry warning labels, and states that LEDs are not subject to the federal laser product performance standard.

Regulatory note: select devices carry FDA 510(k) clearance for specific, limited uses. Most light devices are sold as general wellness products. Read each product page and label.

How we create this guide

AWA sells red light therapy devices. We write these guides to explain how devices work and how to choose and use one. This is general information, not medical advice. Read each product page and label. See our editorial standards.

Prev Post
Next Post
FX500 Red Light Therapy Panel
From this guide
FX500 Red Light Therapy Panel

60 red and near infrared LEDs on a foldable stand, with remote and timer. 2 year warranty.

$269.99Free shipping · 60 day returns · FSA/HSA eligible
FX500 Red Light Therapy Panel $269.99See it

Thanks for subscribing!

This email has been registered!

Shop the look

Choose Options

Back In Stock Notification
Compare
Product SKU Description Collection Availability Product Type Other Details

Choose Options

Login
Shopping Cart
0 items
100%
Free Shipping applied
Find your device 60s match quiz →
Who We Are

American Wellness Authority™
Selling online since 2016
1301 W. Park Ave, Suite F, Ocean, NJ 07712
contact@awarlt.com