AWA LX300 LED Face Mask: Features, Modes and Specs
Quick answer: The AWA LX300 LED face mask is a hands free red light therapy mask for home use. The product page lists red (630nm), near infrared (850nm) and blue (415nm) light modes plus additional color modes, a suggested session of about 10 minutes, 3 to 4 times a week, and an eye shielded design. It also comes with a bonus neck piece. Select devices carry FDA 510(k) clearance for specific, limited uses; most are sold as general wellness products. The LX300 is one of the select AWA devices with clearance, and that clearance is for the face only. This guide covers the features, the light modes, the specs and what the clearance does and does not cover.
What is the AWA LX300 LED face mask?
The LX300 is an LED face mask built for a simple home routine. You put it on, choose a mode, and sit back for a short session while the mask does its job hands free. It is a good starting point for shoppers who want a red light therapy mask with named wavelengths on the product page, a short suggested session, and clear information about what the FDA clearance covers. If you are still comparing options, read our guide on how to choose an FDA cleared LED face mask first, then come back to the specifics here.
LX300 light modes explained
The mode list is the most useful part of any LED face mask page, because it tells you what the device can actually do. The LX300 page names three core modes and notes additional color modes.
Red light (630nm)
Red light at 630nm is the mode people usually have in mind when they search for a red light therapy mask. On the LX300 it is paired with near infrared in the red plus infrared setting.
Near infrared light (850nm)
Near infrared light at 850nm sits just beyond red on the spectrum and cannot be seen by the eye. Since you cannot see it, check the manual so you know which mode is active during a session.
Blue light (415nm)
Blue light at 415nm is a separate mode on the LX300. It can also be used as part of a mixed light setting. Read the manual for how each setting is selected.
Additional color modes
The product page notes that the LX300 includes additional color modes beyond the three above. Those additional modes are outside the clearance, so read the manual for how to use them.
What FDA 510(k) clearance covers for the LX300
FDA clearance is narrow and specific. FDA's page on the Premarket Notification 510(k) process explains that a 510(k) is a submission showing a device is as safe and effective as a legally marketed device, called a predicate. FDA explains how devices are sorted by risk on its device classification page.
Select devices carry FDA 510(k) clearance for specific, limited uses; most are sold as general wellness products. Keep these limits in mind for the LX300:
- The clearance is for the face only. It does not extend to the neck or body.
- The bonus neck piece is not part of the FDA clearance.
- It is FDA clearance, not FDA approval. These are two different pathways.
- It applies to the LX300. Select AWA devices carry clearance, and it does not extend to other AWA devices.
- The additional color modes are outside the clearance.
- Clearance does not promise any particular outcome, and experience varies from person to person.
For more background, see our explainers on what FDA 510(k) clearance means and how to verify a device's FDA claims.
Design and what comes with it
The product page describes the LX300 as a hands free, eye shielded mask made of food grade silicone with a rechargeable battery. Hands free matters for home use because a mask that stays in place is easier to fit into a weeknight routine than a handheld device. The eye shielded design is there because the mask sits close to the eyes, and you should always follow the manual that comes with it.
The LX300 also comes with a bonus neck piece. The page states clearly that the neck piece is not part of the FDA clearance, and the clearance covers the face only. Read the manual for how the accessory is meant to be used.
How to use the LX300
The product page suggests about 10 minutes per session, 3 to 4 times a week, on a clean, bare face. Apply serums and moisturizer after the session, not before, so nothing sits between the mask and your face. Ask your doctor first if you are pregnant, have health questions, or take medicines that affect light sensitivity, and stop use and speak with a professional if you notice irritation.
AWA LX300 specs at a glance
This table uses only facts listed on the product pages for the two AWA LED face masks. Check each page for current details.
| Feature | AWA LX300 | AWA LX500 |
|---|---|---|
| FDA 510(k) clearance | Yes, face only | Yes, face only |
| Light modes listed | Red (630nm), near infrared (850nm), blue (415nm), plus additional color modes | 3 modes: red plus near infrared (630nm and 850nm), blue (415nm), mixed |
| Suggested session | About 10 minutes, 3 to 4 times a week | About 10 minutes, 3 to 4 times a week |
| Design | Hands free, eye shielded, food grade silicone | Hands free silicone, lightweight, eye shielded, 306 LED chips |
| Neck piece | Bonus piece included, not part of the clearance | Not listed |
| Warranty | 1 year | 1 year |
| Shipping and returns | Free US shipping, 60 day money back guarantee | Free US shipping, 60 day money back guarantee |
Check the product page and the included manual for fit and box details before you buy. For a closer look at the other mask, read the AWA LX500 LED face mask features guide, or use the device comparison page.
Who the LX300 suits
The LX300 may suit you if your focus is your face, you like named wavelengths on the product page, and you want a bonus neck piece that sits outside the clearance. If you prefer a mask with exactly three clear modes, compare it with the AWA LX500 LED face mask. You can also browse the LED face mask collection to see every option in one place.
AWA LX300 FAQ
What light modes does the AWA LX300 LED face mask have?
The product page lists red (630nm), near infrared (850nm) and blue (415nm) modes, plus additional color modes.
Is the AWA LX300 FDA cleared?
Select devices carry FDA 510(k) clearance for specific, limited uses; most are sold as general wellness products. The LX300 is one of the select AWA devices with clearance, and the clearance is for the face only. This is clearance, not FDA approval.
Is the neck piece covered by the clearance?
No. The neck piece is a bonus accessory and is not part of the FDA clearance. The clearance does not extend to the neck, the body, or other AWA devices.
How often should I use an LED face mask like the LX300?
Follow the manual. The product page suggests about 10 minutes, 3 to 4 times a week, on a clean, bare face. Check with your doctor first if you are pregnant, have health questions, or take medicines that affect light sensitivity.
What is the return policy?
The product page lists free US shipping and a 60 day money back guarantee. Check the page for the current terms.
Last updated: October 2026. This guide is general information, not medical advice. FDA clearance applies to the specific, limited uses and face only area of use described above and does not promise any outcome.